Tank
Capacity / Construction
- Elliptical shape
- 1000 to 5000 gallon capacity ‘With all seams electrically welded
- 10 gauge steel with 8 gauge rolled heads and baffles with staggered openings
- Mineral wool 2″ insulation with 0.04″ aluminum jacketing
- Sampling valve
- 24″ no-slip. grip-strut on catwalk, and on rear and lop mounted ladder
- Rollover protection built to USDOT specification 49·CFR 173.247
- Tank mounting is single blade bolster design
Manhole
- Overflow well with 3″ drain
- 20· diameter manhole with hinged, quick-opening cover fitted with high temperature gasket
Gauge
- Float type gauge with 50 gallon increments readable from ground and cab rear view mirror
- Measuring stick with 50 gallon increments
Miscellaneous
- Dial and pencil thermometer
- Aluminum fenders (single or tandem)
- Tool box
Circulation System
- Fill line with quick connect coupler
- Heated asphalt pump rated at 400 GPM
- Heated rear tank valve
- Distributing lines are high temperature hoses and ·0· ring seals from circulating system to spray bar
- Hand spray system with 50′ x 3/4″ flexible hose and aluminum wand with cold handle and 2 nozzles. System is reel mounted with a swivel connection.
Heating System
- LPG or diesel burner
- One or two stainless steel, full S” flues
- Diesel, LPG
Flush System
- 25 gallon on-board tank provides heated reusable solvent for cleaning spray system and pump.
- Computer controlled and air valve actuated flush system that when actuated purges the spray system, flushes the spray system and pump with the on-board reusable solvent and returns the solvent to on-board tank.
- 10 gallon wash-down tank and spray hose.
Spraybar
- Full circulating spraybar with hydraulic wings, bar lift and shift with switches front and rear
- 12′ spray bar with 8′ center section with two 2′ folding wings
- Double wings available to 24′
- Wings break away forward and backward to prevent damage
- Limit switches to prevent accidental spray when wings are in the upright position
- Internal poppet spray valves on 4″ centers
- Nozzles are V-slot brass in various sizes
- Electric air ON-OFF in l ‘ increments
- Bar latches for travel
Power System
- PTO. RPTO or crank shaft driven hydrostatic pump driving hydraulic motor direct-coupled to 400 GPM asphalt pump
- 20 gallon hydraulic fluid reservoir with sight level gauge
CONTROLS
Cab Controls
- CRC system with digital readout ± 1% per square yard
- Computer control of all distributor functions
- Circulate/spray master switch
- Magnetic speed measurement
- Spraybar hydraulic controls
- Four-way mirror
- Taper Cut controls that add or cut spray control valves in sequence across the spray bar with the actuation of a single switch
- Built in computer and component diagnostics
Rear Controls
- Burner controls
- Spraybar hydraulic controls
External Washdown
- 10 gallon air pressurized tank dispenses biodegradable solvents
Options
- Spray Bar Length
- Finger Linkage (Per Foot)
- Double-Fold Wings
- Triple-Fold Wings
- Individually Controlled Line Markers (Pair)
- Hydraulic Spray Bar Latch
- Tri-Cylinder Valves
- Low Maintenance Pump
- Stainless Steel Flex Bar Feed Hoses
- LPG Burners With 50 Gallon Tank
- Diesel Burners
- Low Density Watt Electric Heat (AC Plug)
- Beacon Light
- Front Tank Suction
- Second Tank Float Gauge
- Trailer Towing Hitch Package
- Trough Mounted Load Valve and Swivel